DMC DBS-1200 Two-Step Banding Tool for .125 Wide Welded EMI/RFI Shield Bands (M81306/2-02B) Facilities 4226H2873

EMI/RFI Band Application System for M85049/128 Shield Termination Bands.

DMC’s Two-Step Banding Tools are designated for M85049/128-1, M85049/128-2, M85049/128-5 and M85049/128-6 “welded buckle” bands. These tools tension and cut the band and leave an extended cut off tab. The second step provides an extra level of security by utilizing a roll-over tool to bend the cut-off tab over a full 180 degrees in a second operation.

DBS-1200 (M81306/2-02B) .125 Wide Mini-Band Tool: Size: 1.38″ x 5.5″ x 7.5″ Weight: 1.4 lbs. Tension Range: 70-90 lbs. Cut-off blade are replaceable. Contact DMC to order replacement blade.

Works with the DBS-R05 (M81306/2-02D) Roll Over Tool for .125 Wide Bands.

Verification of Two-Step EMI/RFI Band Tools:

DMC’s Two-Step Band Application Tools may be adjusted and verified to ensure correct band tension. In order to make this operation simple and efficient for field use, DMC designed and patented a compression fixture system (DBS-CG3A) which uses a Go/No-Go Gage to measure the tool tension.

The DBS-CG1 Laboratory Calibration Instrument will allow the operator to measure the exact tension produced by the tool.

A free-standing holding fixture is available (DBS-CG1-F) to aid the calibration process by securing the DBS-CG1 and banding tool in place. The DBS-CG1-F holding fixture secures the banding tool in place during calibration. This fixture only works with the Two-Step Tools and DBS-CG1 Calibration Instrument (Banding tools and DBS-CG1 are sold separately)

Calibration certificate with readings included.